Please note you will need to enter the * key to define the periods in the IP address ie: 10*0*0*10 = 10.0.0.10. Make sure to hang up between each part of this step. After picking up the phone, dial **** to re-enter the config menu.

1. Dial ****, once you hear the voice, dial 101# followed by 0# 1  - Hang up.
2. Dial **** once you hear the voice, dial 111#, then 192*168*1*10# 1 - Hang up.
3. Dial **** once you hear the voice, dial 121#, then 255*255*255*0# 1    - Hang up.
4. Dial **** once you hear the voice, dial 131#, then 192*168*1*1# 1   -Hang up.  

1. Dial **** 100 # to listen to the state of DHCP (voice should say ‘disabled’)
2. Dial **** 110 # to listen to your IP address (should say 192.168.1.10)
3. Dial **** 120 # to listen to your Subnet Mask (should say 255.255.255.0)
4. Dial **** 130 # to listen to your Default Gateway (should say 192.168.1.1)

1. Start your web browser and type the private IP address of the ADSL Router in the URL field: http://192.168.1.1
2. After connecting to the device, you will be prompted to enter username and password. By default, the username is admin and the password is admin.
   

1. Go to the Advanced Setup> Virtual Server >Port Forwarding
   
2. Click Add
3. Enter a " User Defined" Rule
   
4. Name the rule " engin"
5. Enter 192.168.1.10 for the address to forward to.
6. Enter Protocol as UDP
7. Enter start and finish port 5060 (External and Internal Packet )
8. Repeat the same process for ports 16384-20384 (External and Internal Packet )
9. Click " Apply"

---