Overview
Please note you will need to enter the * key to define the periods in the IP address
ie: 10*0*0*10 = 10.0.0.10. Make sure to hang up between each part of this step. After picking up the phone, dial **** to re-enter the config menu.
Step 1: Assign the static IP
- Dial ****, once you hear the voice, dial 101# followed by 0# 1 - Hang up.
- Dial **** once you hear the voice, dial 111#, then 192*168*1*10# 1 - Hang up.
- Dial **** once you hear the voice, dial 121#, then 255*255*255*0# 1 - Hang up.
- Dial **** once you hear the voice, dial 131#, then 192*168*1*1# 1 -Hang up.
Step 2: To check that you have implemented this correctly
- Dial **** 100 # to listen to the state of DHCP (voice should say ‘disabled’)
- Dial **** 110 # to listen to your IP address
(should say 192.168.1.10)
- Dial **** 120 # to listen to your Subnet Mask (should say 255.255.255.0)
- Dial **** 130 # to listen to your Default Gateway
(should say 192.168.1.1)
Step 3: Login to the NB1300
- Login into the router by typing this into your web browser http://192.168.1.1
- Use the following username & password: User Name: admin Password: password
Step 4: Access the Port Forwarding menu
- Go to the Adminstration menu
- Go to Port Forwarding
Step 5: Setup a Service rule for SIP
- You will then be presented with the port forwarding menu to configure a service rule for SIP.
- Enter Public port: 5060
- Enter Private port: 5060
- Enter Protocol Type: UDP
- Enter Host IP address
: 192.168.1.10
- Click "Add this Setting"
