PacketMan VoIP and Internet Knowledgebase / engin oneHub / Internet Setup /
Email this article to another user.
* Your name:
Your Email Address:
User's Email Address:
Message for User:


I am a TPG ADSL customer and can't get my engin oneHub to connect to the Internet
Overview
Step 1:  Log into Telnet
Step 2: Apply Fix
Step 3: Run Setup Wizard

Step 1:  Log into Telnet
  1. In order to complete this fix, you will need to enter some commands into a Telnet session. WINDOWS VISTA USERS GO STRAIGHT TO STEP 6
  2. Windows XP users simply click Start > Run and type telnet '192.168.1.254' without the quotations into the Run box



  3. You will be presented with a black screen prompting you for a username. Type 'Administrator' (Case sensitive and without the quotations) and press Enter
  4. You will then be prompted for a password. There is no password by default, just press Enter
  5. You will then be presented with the Telnet home screen for the oneHub



  6. Windows Vista users will need to enable Telnet client before proceeding
  7. Select Start Control Pannel Programs and Features



  8. Select 'Turn Windows features On or Off' from the left hand side



  9. This will open up a popup window displaying a list of windows features. This may take a while to generate. Place a tick in the box next to Telnet Client and click OK. DO NOT change anything else.



  10. Windows will now enable the feature. This WILL take several minutes. If you get a User Alert box pop up when you click OK, simply allow the change.



  11. Once complete, click on Start, then type 'telnet 192.168.1.254' without the quotations into the search box at the bottom and press enter



  12. You will be presented with a black screen prompting you for a username. Type 'Administrator' (Case sensitive and without the quotations) and press Enter
  13. You will then be prompted for a password. There is no password by default, just press Enter
  14. You will then be presented with the Telnet home screen for the oneHub



Step 2: Apply Fix
  1. From the home screen, type ppp relay ifdelete intf ethoa_8_35 and press enter. If you get an error, type ppp relay ifdelete intf Internet and press enter.





  2. Type ppp ifdetach intf Internet



  3. Type ppp ifconfig intf Internet dest ethoa_8_35 and press enter. If you get an error, then type ppp ifconfig intf Internet dest Internet and press enter instead.



  4. The Type ppp ifattach intf Internet and press enter. Then type saveall



Step 3: Connect to the Internet
  1. You can now connect to the Internet by entering your TPG internet details as normal
  2. For detailed instructions see knowledgbase article number 492


RSS
Powered by KnowledgebasePublisher (Knowledgebase software)